Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_59B_59MB_Drawing.jpg
Series_59B_TC.png

12.00mm Dia, 2 Flute, Ball Nose End Mill - 49637

SERIES: 59B

General Application End Mill

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 59B, Ball Nose End Mill - 49637


SKU / EDP49637
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series59B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.1811
Length of Cut (APMX) (mm)30.00
Overall Length (LF) (Decimal Inch)4.3307
Overall Length (LF) (mm)110.00
Shank Length (LS) (Decimal Inch)3.1490
Shank Length (LS) (mm)79.98
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)25
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49637
Series_59B_TA.png

12.00mm Dia, 2 Flute, Ball Nose End Mill - 49647

SGS 12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 59B, Ball Nose End Mill - 49647

Series_59B_TN.png

12.00mm Dia, 2 Flute, Ball Nose End Mill - 49627

SGS 12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE (TiN) Coated, Series 59B, Ball Nose End Mill - 49627

Series_59B_UN.jpg

12.00mm Dia, 2 Flute, Ball Nose End Mill - 43905

SGS 12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 2 Flute, 25 Degree Helix, Uncoated, Series 59B, Ball Nose End Mill - 43905

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.