Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1B_1MB_Drawing.jpg
Series_1ELB_LB_TC.png

20.00mm Dia, 4 Flute, Ball Nose End Mill - 49529

SERIES: X1B

General Application End Mill

20.00mm Dia, 75.00mm LOC, 20.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series X1B, Ball Nose End Mill - 49529


SKU / EDP49529
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesX1B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthLong
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7874
Cutting Diameter (DC) (mm)20.00
Shank Diameter (DCON) (Decimal Inch)0.7874
Shank Diameter (DCON) (mm)20.00
Length of Cut (APMX) (Decimal Inch)2.9528
Length of Cut (APMX) (mm)75.00
Overall Length (LF) (Decimal Inch)5.9055
Overall Length (LF) (mm)150.00
Shank Length (LS) (Decimal Inch)2.9570
Shank Length (LS) (mm)75.11
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49529
Series_1ELB_LB_TA.png

20.00mm Dia, 4 Flute, Ball Nose End Mill - 49542

SGS 20.00mm Dia, 75.00mm LOC, 20.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series X1B, Ball Nose End Mill - 49542

Series_1ELB_LB_TN.png

20.00mm Dia, 4 Flute, Ball Nose End Mill - 49516

SGS 20.00mm Dia, 75.00mm LOC, 20.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series X1B, Ball Nose End Mill - 49516

Series_1ELB_UN.jpg

20.00mm Dia, 4 Flute, Ball Nose End Mill - 43186

SGS 20.00mm Dia, 75.00mm LOC, 20.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series X1B, Ball Nose End Mill - 43186

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.