Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_5_5M_Drawing.jpg
Series_5S_TA.png

11.00mm Dia, 3 Flute, Square End End Mill - 48813

SERIES: 05S

General Application End Mill

11.00mm Dia, 25.00mm LOC, 12.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 05S, Square End End Mill - 48813


SKU / EDP48813
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series05S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4331
Cutting Diameter (DC) (mm)11.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)0.9843
Length of Cut (APMX) (mm)25.00
Overall Length (LF) (Decimal Inch)2.9528
Overall Length (LF) (mm)75.00
Shank Length (LS) (Decimal Inch)1.9660
Shank Length (LS) (mm)49.94
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48813
Series_5S_TC.png

11.00mm Dia, 3 Flute, Square End End Mill - 48792

SGS 11.00mm Dia, 25.00mm LOC, 12.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 05S, Square End End Mill - 48792

Series_5S_TN.png

11.00mm Dia, 3 Flute, Square End End Mill - 48770

SGS 11.00mm Dia, 25.00mm LOC, 12.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 05S, Square End End Mill - 48770

Series_5_UN.jpg

11.00mm Dia, 3 Flute, Square End End Mill - 40561

SGS 11.00mm Dia, 25.00mm LOC, 12.00mm Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series 05S, Square End End Mill - 40561

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.