Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Series_Z5CR_Z5MCR_Drawing.jpg
Series_Z5CR_TM.jpg
Series_Z5TM_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47081

SERIES: Z5C

Z-Carb-HPR

25.00mm Dia, 53.00mm LOC, 25.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47081

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP47081
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.9843
Cutting Diameter (DC) (mm)25.00
Shank Diameter (DCON) (Decimal Inch)0.9843
Shank Diameter (DCON) (mm)25.00
Length of Cut (APMX) (Decimal Inch)2.0866
Length of Cut (APMX) (mm)53.00
Overall Length (LF) (Decimal Inch)4.7638
Overall Length (LF) (mm)121.00
Corner Radius (RE) (Decimal Inch)0.1181
Corner Radius (RE) (mm)3.00
Shank Length (LS) (Decimal Inch)2.6772
Shank Length (LS) (mm)68.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.3450
Non-Cutting Center Diameter (NCD) (mm)8.76
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 47081
Series_Z5CR_TA.jpg

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47145

SGS 25.00mm Dia, 53.00mm LOC, 25.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47145

Series_Z5CR_TA.jpg

25.00mm Dia, 5 Flute, Corner Radius End Mill - 48053

SGS 25.00mm Dia, 53.00mm LOC, 25.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48053

Series_Z5_IC_TA.jpg

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47148

SGS 25.00mm Dia, 53.00mm LOC, 25.00mm Shank Dia, 3.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47148

Series_Z5CR_TM.jpg

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47088

SGS 25.00mm Dia, 53.00mm LOC, 25.00mm Shank Dia, 3.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47088

Series_Z5_IC_TM.jpg

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47095

SGS 25.00mm Dia, 53.00mm LOC, 25.00mm Shank Dia, 3.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47095

Product enquiry form

FUTURE CRM FORM HERE