Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3_3M_Drawing.jpg
Series_3S_TN.png

11/16" Dia, 2 Flute, Square End End Mill - 39369

SERIES: 03S

General Application End Mill

11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 03S, Square End End Mill - 39369


SKU / EDP39369
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series03S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6875
Cutting Diameter (DC) (Fractional Inch)11/16
Cutting Diameter (DC) (mm)17.46
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)1.3750
Length of Cut (APMX) (Fractional Inch)1-3/8
Length of Cut (APMX) (mm)34.93
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)1.8250
Shank Length (LS) (mm)46.36
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 39369
Series_3S_TA.png

11/16" Dia, 2 Flute, Square End End Mill - 30465

SGS 11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 03S, Square End End Mill - 30465

Series_3S_TC.png

11/16" Dia, 2 Flute, Square End End Mill - 39569

SGS 11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 03S, Square End End Mill - 39569

Series_3.jpg

11/16" Dia, 2 Flute, Square End End Mill - 30369

SGS 11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series 03S, Square End End Mill - 30369

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.