Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

11/16" Dia, 2 Flute, Square End End Mill - 30369

SERIES: 03S

General Application End Mill

11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series 03S, Square End End Mill - 30369

SKU / EDP	30369
Category	Solid Round Tools > Milling > General Application End Mills
Min Order Qty	1
Series	03S
Series Description	General Application End Mill
High Performance	No
End Configuration	Square End
Tool Length	Stub
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)	0.6875
Cutting Diameter (DC) (Fractional Inch)	11/16
Cutting Diameter (DC) (mm)	17.46
Shank Diameter (DCON) (Decimal Inch)	0.7500
Shank Diameter (DCON) (Fractional Inch)	3/4
Shank Diameter (DCON) (mm)	19.05
Length of Cut (APMX) (Decimal Inch)	1.3750
Length of Cut (APMX) (Fractional Inch)	1-3/8

Length of Cut (APMX) (mm)	34.93
Overall Length (LF) (Decimal Inch)	4.0000
Overall Length (LF) (Fractional Inch)	4
Overall Length (LF) (mm)	101.60
Shank Length (LS) (Decimal Inch)	1.8250
Shank Length (LS) (mm)	46.36
Cutting Diameter (DC) Tolerance (Decimal Inch)	+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)	+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	Bright/Uncoated
Additional Geometry	Right Hand Cut Direction (RHC)
Rake Angle	Positive
Helix Angle	Right Spiral
Helix Angle (Degree)	30
Variable Helix	No
Center Cutting	Yes
Chip Breaker	No