Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Series_Z5CR_Z5MCR_Drawing.jpg
Series_Z5CR_TM.jpg
Series_Z5TM_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1/2" Dia, 5 Flute, Corner Radius End Mill - 37034

SERIES: Z5C

Z-Carb-HPR

1/2" Dia, 5/8" LOC, 1/2" Shank Dia, 0.0900" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37034

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP37034
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.5000
Cutting Diameter (DC) (Fractional Inch)1/2
Cutting Diameter (DC) (mm)12.70
Shank Diameter (DCON) (Decimal Inch)0.5000
Shank Diameter (DCON) (Fractional Inch)1/2
Shank Diameter (DCON) (mm)12.70
Length of Cut (APMX) (Decimal Inch)0.6250
Length of Cut (APMX) (Fractional Inch)5/8
Length of Cut (APMX) (mm)15.88
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Corner Radius (RE) (Decimal Inch)0.0900
Corner Radius (RE) (mm)2.29
Shank Length (LS) (Decimal Inch)2.3750
Shank Length (LS) (Fractional Inch)2-3/8
Shank Length (LS) (mm)60.33
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1750
Non-Cutting Center Diameter (NCD) (mm)4.45
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo

Alternative Products SKU / EDP to 37034
Series_Z5CR_TA.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 38536

SGS 1/2" Dia, 5/8" LOC, 1/2" Shank Dia, 0.0900" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38536

Series_Z5CR_TA.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 38581

SGS 1/2" Dia, 5/8" LOC, 1/2" Shank Dia, 0.0900" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 38581

Series_Z5_IC_TA.png

1/2" Dia, 5 Flute, Corner Radius End Mill - 37337

SGS 1/2" Dia, 5/8" LOC, 1/2" Shank Dia, 0.0900" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37337

Series_Z5CR_TM.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 37028

SGS 1/2" Dia, 5/8" LOC, 1/2" Shank Dia, 0.0900" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37028

Series_Z5_IC_TM.png

1/2" Dia, 5 Flute, Corner Radius End Mill - 37338

SGS 1/2" Dia, 5/8" LOC, 1/2" Shank Dia, 0.0900" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37338

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.