Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
9/16" Dia, 4 Flute, Corner Radius End Mill - 36806
SERIES: ZPCR
Z-Carb-AP
9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36806
Feature & Benefits
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design changes the cutting angle to improve harmonics
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 36806 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | ZPCR |
Series Description | Z-Carb-AP |
High Performance | Yes |
End Configuration | Corner Radius |
Tool Length | Stub |
Unit (inch/mm) | inch |
Number of Flutes | 4 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.5625 |
Cutting Diameter (DC) (Fractional Inch) | 9/16 |
Cutting Diameter (DC) (mm) | 14.29 |
Shank Diameter (DCON) (Decimal Inch) | 0.5625 |
Shank Diameter (DCON) (Fractional Inch) | 9/16 |
Shank Diameter (DCON) (mm) | 14.29 |
Length of Cut (APMX) (Decimal Inch) | 1.1250 |
Length of Cut (APMX) (Fractional Inch) | 1-1/8 |
Length of Cut (APMX) (mm) | 28.58 |
Overall Length (LF) (Decimal Inch) | 3.5000 |
Overall Length (LF) (Fractional Inch) | 3-1/2 |
Overall Length (LF) (mm) | 88.90 |
---|---|
Corner Radius (RE) (Decimal Inch) | 0.0300 |
Corner Radius (RE) (mm) | 0.76 |
Shank Length (LS) (Decimal Inch) | 2.3750 |
Shank Length (LS) (Fractional Inch) | 2-3/8 |
Shank Length (LS) (mm) | 60.33 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Shank Type | Straight |
Weldon Flat | No |
Coolant Option | JetStream Coolant Slots |
Coating Description | TX (Ti-NAMITE-X) |
Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
Rake Angle | Variable |
Helix Angle | Variable Right Spiral |
Helix Angle (Degree) | 35-38 |
Variable Helix | Yes |
Center Cutting | Yes |
Chip Breaker | No |
Alternative Products SKU / EDP to 36806
9/16" Dia, 4 Flute, Corner Radius End Mill - 36575
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36575
9/16" Dia, 4 Flute, Corner Radius End Mill - 36558
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36558
9/16" Dia, 4 Flute, Corner Radius End Mill - 36860
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36860
9/16" Dia, 4 Flute, Corner Radius End Mill - 36868
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36868
9/16" Dia, 4 Flute, Corner Radius End Mill - 36575
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36575
9/16" Dia, 4 Flute, Corner Radius End Mill - 36558
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36558
9/16" Dia, 4 Flute, Corner Radius End Mill - 36860
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36860
9/16" Dia, 4 Flute, Corner Radius End Mill - 36868
SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36868
Product enquiry form
FUTURE CRM FORM HERE