Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_ZH1CR_ZH1MCR_Drawing.jpg
Series_ZH1_Logo_Vector.eps
Series_ZH1_Logo.jpg
Series_ZH1_TA.jpg

9/16" Dia, 4 Flute, Corner Radius End Mill - 36575

SERIES: ZH1C

Z-Carb-HTA

9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36575

Feature & Benefits

  • The original Z-Carb design with an enhanced core and higher helix suited for the demands of high temperature alloys
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Optimal material removal rates through increased feed and depths of cut for difficult to machine materials
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP36575
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZH1C
Series DescriptionZ-Carb-HTA
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.5625
Cutting Diameter (DC) (Fractional Inch)9/16
Cutting Diameter (DC) (mm)14.29
Shank Diameter (DCON) (Decimal Inch)0.5625
Shank Diameter (DCON) (Fractional Inch)9/16
Shank Diameter (DCON) (mm)14.29
Length of Cut (APMX) (Decimal Inch)1.1250
Length of Cut (APMX) (Fractional Inch)1-1/8
Length of Cut (APMX) (mm)28.58
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Shank Length (LS) (Decimal Inch)2.3750
Shank Length (LS) (Fractional Inch)2-3/8
Shank Length (LS) (mm)60.33
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleVariable Right Spiral
Helix Angle (Degree)38-41
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 36575
Series_ZH1_TA.jpg

9/16" Dia, 4 Flute, Corner Radius End Mill - 36558

SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36558

Series_Z1P_TA.jpg

9/16" Dia, 4 Flute, Corner Radius End Mill - 36860

SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36860

Series_Z1P_TA.jpg

9/16" Dia, 4 Flute, Corner Radius End Mill - 36868

SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36868

Series_Z1P_TA.jpg

9/16" Dia, 4 Flute, Corner Radius End Mill - 36806

SGS 9/16" Dia, 1-1/8" LOC, 9/16" Shank Dia, 0.0300" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36806

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.