Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
7/16" Dia, 5 Flute, Square End End Mill - 32663
SERIES: 55S
V-Carb
7/16" Dia, 1" LOC, 7/16" Shank Dia, 5 Flute, 45 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 55S, V-Carb, Square End End Mill - 32663
Feature & Benefits
- Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
- The choice when peak finish quality is the requirement
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 32663 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | 55S |
Series Description | V-Carb |
High Performance | Yes |
End Configuration | Square End |
Tool Length | Regular |
Unit (inch/mm) | inch |
Number of Flutes | 5 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.4375 |
Cutting Diameter (DC) (Fractional Inch) | 7/16 |
Cutting Diameter (DC) (mm) | 11.11 |
Shank Diameter (DCON) (Decimal Inch) | 0.4375 |
Shank Diameter (DCON) (Fractional Inch) | 7/16 |
Shank Diameter (DCON) (mm) | 11.11 |
Length of Cut (APMX) (Decimal Inch) | 1.0000 |
Length of Cut (APMX) (Fractional Inch) | 1 |
Length of Cut (APMX) (mm) | 25.40 |
Overall Length (LF) (Decimal Inch) | 2.7500 |
---|---|
Overall Length (LF) (Fractional Inch) | 2-3/4 |
Overall Length (LF) (mm) | 69.85 |
Shank Length (LS) (Decimal Inch) | 1.7500 |
Shank Length (LS) (Fractional Inch) | 1-3/4 |
Shank Length (LS) (mm) | 44.45 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Shank Type | Straight |
Weldon Flat | No |
Coolant Option | External Coolant |
Coating Description | AlTiN (Ti-NAMITE-A) |
Additional Geometry | Right Hand Cut Direction (RHC) |
Rake Angle | Positive |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 45 |
Variable Helix | No |
Center Cutting | Yes |
Chip Breaker | No |
Product enquiry form
FUTURE CRM FORM HERE