Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_45_Drawing.jpg
Series_44_45_Logo.jpg
Series_45_UN.jpg
Series_44_45_Logo_Vector.eps

5/8" Dia, 2 Flute, Corner Radius End Mill - 91246

SERIES: 45C

Ski-Carb

5/8" Dia, 0.8700" LOC, 5/8" Shank Dia, 0.0250" Radius, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 45C, Ski-Carb, Corner Radius End Mill - 91246

Feature & Benefits

  • Polished ski land with primary and secondary flute wall design minimizes chip interference by directing chips away from secondary flute
  • Circular land allows for increased control at various speed and feed rates ultimately reducing chatter
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP91246
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series45C
Series DescriptionSki-Carb
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.6250
Cutting Diameter (DC) (Fractional Inch)5/8
Cutting Diameter (DC) (mm)15.88
Shank Diameter (DCON) (Decimal Inch)0.6250
Shank Diameter (DCON) (Fractional Inch)5/8
Shank Diameter (DCON) (mm)15.88
Length of Cut (APMX) (Decimal Inch)0.8700
Length of Cut (APMX) (mm)22.10
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Corner Radius (RE) (Decimal Inch)0.0250
Corner Radius (RE) (mm)0.64
Shank Length (LS) (Decimal Inch)2.6250
Shank Length (LS) (Fractional Inch)2-5/8
Shank Length (LS) (mm)66.68
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00043
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.011
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 91246
Series_45_UN.jpg

5/8" Dia, 2 Flute, Corner Radius End Mill - 91239

SGS 5/8" Dia, 0.8700" LOC, 5/8" Shank Dia, 0.0250" Radius, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 45C, Ski-Carb, Corner Radius End Mill - 91239

Series_45_UN.jpg

5/8" Dia, 2 Flute, Corner Radius End Mill - 91254

SGS 5/8" Dia, 0.8700" LOC, 5/8" Shank Dia, 0.0250" Radius, 2 Flute, 45 Degree Helix, Uncoated, Series 45C, Ski-Carb, Corner Radius End Mill - 91254

Series_45_UN.jpg

5/8" Dia, 2 Flute, Corner Radius End Mill - 91261

SGS 5/8" Dia, 0.8700" LOC, 5/8" Shank Dia, 0.0250" Radius, 2 Flute, 45 Degree Helix, Uncoated, Series 45C, Ski-Carb, Corner Radius End Mill - 91261

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.