Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_103_Drawing.jpg
Series_103_TA.png

11.00mm Dia, 150 Degree Point, Solid Carbide Drill - 69042

SERIES: 103

General Application Drill

11.00mm Dia, 150 Degree Point, 11.00mm Shank Dia, 95.00mm OAL, 3 Flute, 3xD, Ti-NAMITE-A (AlTiN) Coated, Series 103, Solid Carbide Drill - 69042


SKU / EDP69042
CategorySolid Round Tools > Holemaking > General Application Drills
Min Order Qty1
Series103
Series DescriptionGeneral Application Drill
High PerformanceNo
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(P) Steel|(K) Cast Iron|(N) Non-Ferrous Materials
Secondary Workpiece Material(H) Hardened Materials
Reach (xD)3xD
Size11.00mm
Cutting Diameter (DC) (Decimal Inch)0.4331
Cutting Diameter (DC) (mm)11.00
Shank Diameter (DCON) (Decimal Inch)0.4331
Shank Diameter (DCON) (mm)11.00
Usable Length (LU) (Decimal Inch)1.2992
Usable Length (LU) (mm)33.00
Flute Length (LCF) (Decimal Inch)1.8504
Flute Length (LCF) (mm)47.00
Overall Length (OAL) (Decimal Inch)3.7402
Overall Length (OAL) (mm)95.00
Shank Length (LS) (Decimal Inch)1.9540
Shank Length (LS) (mm)49.63
Point Angle (Degree)150
Cutting Diameter (DC) Tolerance (Decimal Inch)+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN StandardDIN 6539
Number of Margins3

Alternative Products SKU / EDP to 69042
Series_103_UN.png

11.00mm Dia, 150 Degree Point, Solid Carbide Drill - 63032

SGS 11.00mm Dia, 150 Degree Point, 11.00mm Shank Dia, 95.00mm OAL, 3 Flute, 3xD, Uncoated, Series 103, Solid Carbide Drill - 63032

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.