Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_103_Drawing.jpg
Series_103_TA.png

3.80mm Dia, 150 Degree Point, Solid Carbide Drill - 68973

SERIES: 103

General Application Drill

3.80mm Dia, 150 Degree Point, 3.80mm Shank Dia, 55.00mm OAL, 3 Flute, 3xD, Ti-NAMITE-A (AlTiN) Coated, Series 103, Solid Carbide Drill - 68973


SKU / EDP68973
CategorySolid Round Tools > Holemaking > General Application Drills
Min Order Qty1
Series103
Series DescriptionGeneral Application Drill
High PerformanceNo
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(P) Steel|(K) Cast Iron|(N) Non-Ferrous Materials
Secondary Workpiece Material(H) Hardened Materials
Reach (xD)3xD
Size3.80mm
Cutting Diameter (DC) (Decimal Inch)0.1496
Cutting Diameter (DC) (mm)3.80
Shank Diameter (DCON) (Decimal Inch)0.1496
Shank Diameter (DCON) (mm)3.80
Usable Length (LU) (Decimal Inch)0.6693
Usable Length (LU) (mm)17.00
Flute Length (LCF) (Decimal Inch)0.8661
Flute Length (LCF) (mm)22.00
Overall Length (OAL) (Decimal Inch)2.1654
Overall Length (OAL) (mm)55.00
Shank Length (LS) (Decimal Inch)1.3140
Shank Length (LS) (mm)33.38
Point Angle (Degree)150
Cutting Diameter (DC) Tolerance (Decimal Inch)+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingNo
Chip BreakerNo
DIN StandardDIN 6539
Number of Margins3

Alternative Products SKU / EDP to 68973
Series_103_UN.png

3.80mm Dia, 150 Degree Point, Solid Carbide Drill - 63048

SGS 3.80mm Dia, 150 Degree Point, 3.80mm Shank Dia, 55.00mm OAL, 3 Flute, 3xD, Uncoated, Series 103, Solid Carbide Drill - 63048

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.