Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_103_Drawing.jpg
Series_103_TA.png

#15, 150 Degree Point, Solid Carbide Drill - 58037

SERIES: 103

General Application Drill

#15, 150 Degree Point, 0.1800" Shank Dia, 2-3/4" OAL, 3 Flute, 5xD, Ti-NAMITE-A (AlTiN) Coated, Series 103, Solid Carbide Drill - 58037


SKU / EDP58037
CategorySolid Round Tools > Holemaking > General Application Drills
Min Order Qty1
Series103
Series DescriptionGeneral Application Drill
High PerformanceNo
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(K) Cast Iron|(N) Non-Ferrous Materials
Secondary Workpiece Material(H) Hardened Materials
Reach (xD)5xD
Size#15
Cutting Diameter (DC) (Decimal Inch)0.1800
Cutting Diameter (DC) (mm)4.57
Cutting Diameter (DC) (Wire)#15
Shank Diameter (DCON) (Decimal Inch)0.1800
Shank Diameter (DCON) (mm)4.57
Usable Length (LU) (Decimal Inch)1.2969
Usable Length (LU) (Fractional Inch)1-19/64
Usable Length (LU) (mm)32.94
Flute Length (LCF) (Decimal Inch)1.6250
Flute Length (LCF) (Fractional Inch)1-5/8
Flute Length (LCF) (mm)41.28
Overall Length (OAL) (Decimal Inch)2.7500
Overall Length (OAL) (Fractional Inch)2-3/4
Overall Length (OAL) (mm)69.85
Shank Length (LS) (Decimal Inch)1.0950
Shank Length (LS) (mm)27.81
Point Angle (Degree)150
Cutting Diameter (DC) Tolerance (Decimal Inch)+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Number of Margins3

Alternative Products SKU / EDP to 58037
Series_103_UN.png

#15, 150 Degree Point, Solid Carbide Drill - 53015

SGS #15, 150 Degree Point, 0.1800" Shank Dia, 2-3/4" OAL, 3 Flute, 5xD, Uncoated, Series 103, Solid Carbide Drill - 53015

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.