Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_301_301M_Drawing.jpg
Series_301_TA.png

#00 0.0250” Dia, 118 Degree, 2 Flute, Countersink - 57015

SERIES: 301

General Application Drill and Countersink Combo

#00 0.0250” Dia, 118 Degree, 2 Flute, 1/8" Body Dia, Ti-NAMITE-A (AlTiN) Coated, Series 301, General Application Drill and Countersink Combo - 57015


SKU / EDP57015
CategorySolid Round Tools > Holemaking > General Application Countersinks
Min Order Qty1
Series301
Series DescriptionGeneral Application Drill and Countersink Combo
High PerformanceNo
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Size#00
Cutting Diameter (DC) (Decimal Inch)0.0250
Cutting Diameter (DC) (mm)0.64
Cutting Diameter (DC) (Wire)#00
Body Diameter (DCON) (Decimal Inch)0.1250
Body Diameter (DCON) (Fractional Inch)1/8
Body Diameter (DCON) (mm)3.18
Flute Length (LCF) (Decimal Inch)0.3120
Flute Length (LCF) (mm)7.92
Overall Length (OAL) (Decimal Inch)1.5000
Overall Length (OAL) (Fractional Inch)1-1/2
Overall Length (OAL) (mm)38.10
Shank Length (LS) (Decimal Inch)0.8760
Shank Length (LS) (mm)22.25
Point Angle (Degree)118
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Helix AngleRight Spiral
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Chamfer Angle (a) (Degree)30
Primary Chamfer Angle (a) (Degree)30
Number of Margins2

Alternative Products SKU / EDP to 57015
Series_301_UN.png

#00 0.0250” Dia, 118 Degree, 2 Flute, Countersink - 57005

SGS #00 0.0250” Dia, 118 Degree, 2 Flute, 1/8" Body Dia, Uncoated, Series 301, General Application Drill and Countersink Combo - 57005

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.