Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

#52, 118 Degree Point, Solid Carbide Drill - 51052

SERIES: 101

General Application Drill

#52, 118 Degree Point, 0.0635" Shank Dia, 1-1/2" OAL, 2 Flute, 5xD, Uncoated, Series 101, Solid Carbide Drill - 51052

SKU / EDP	51052
Category	Solid Round Tools > Holemaking > General Application Drills
Min Order Qty	1
Series	101
Series Description	General Application Drill
High Performance	No
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Reach (xD)	5xD
Size	#52
Cutting Diameter (DC) (Decimal Inch)	0.0635
Cutting Diameter (DC) (mm)	1.61
Cutting Diameter (DC) (Wire)	#52
Shank Diameter (DCON) (Decimal Inch)	0.0635
Shank Diameter (DCON) (mm)	1.61
Usable Length (LU) (Decimal Inch)	0.6094
Usable Length (LU) (Fractional Inch)	39/64
Usable Length (LU) (mm)	15.48
Flute Length (LCF) (Decimal Inch)	0.7500
Flute Length (LCF) (Fractional Inch)	3/4

Flute Length (LCF) (mm)	19.05
Overall Length (OAL) (Decimal Inch)	1.5000
Overall Length (OAL) (Fractional Inch)	1-1/2
Overall Length (OAL) (mm)	38.10
Shank Length (LS) (Decimal Inch)	0.7500
Shank Length (LS) (Fractional Inch)	3/4
Shank Length (LS) (mm)	19.05
Point Angle (Degree)	118
Cutting Diameter (DC) Tolerance (Decimal Inch)	+.00000 / -.00050
Cutting Diameter (DC) Tolerance (mm)	+.0000 / -.0127
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	Bright/Uncoated
Additional Geometry	Right Hand Cut Direction (RHC)
Helix Angle	Right Spiral
Helix Angle (Degree)	20
Variable Helix	No
Center Cutting	No
Chip Breaker	No
Number of Margins	2