Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_5_5M_Drawing.jpg
Series_5EL_TN.png

10.00mm Dia, 3 Flute, Square End End Mill - 49471

SERIES: X5S

General Application End Mill

10.00mm Dia, 38.00mm LOC, 10.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series X5S, Square End End Mill - 49471


SKU / EDP49471
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesX5S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthLong
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3937
Cutting Diameter (DC) (mm)10.00
Shank Diameter (DCON) (Decimal Inch)0.3937
Shank Diameter (DCON) (mm)10.00
Length of Cut (APMX) (Decimal Inch)1.4961
Length of Cut (APMX) (mm)38.00
Overall Length (LF) (Decimal Inch)3.9370
Overall Length (LF) (mm)100.00
Shank Length (LS) (Decimal Inch)2.4440
Shank Length (LS) (mm)62.08
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49471
Series_5EL_TA.png

10.00mm Dia, 3 Flute, Square End End Mill - 49497

SGS 10.00mm Dia, 38.00mm LOC, 10.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series X5S, Square End End Mill - 49497

Series_5EL_TC.png

10.00mm Dia, 3 Flute, Square End End Mill - 49484

SGS 10.00mm Dia, 38.00mm LOC, 10.00mm Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series X5S, Square End End Mill - 49484

Series_5EL_UN.png

10.00mm Dia, 3 Flute, Square End End Mill - 43525

SGS 10.00mm Dia, 38.00mm LOC, 10.00mm Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series X5S, Square End End Mill - 43525

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.