Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_17_17M_Drawing.jpg
Series_17_TN.png

12.00mm Dia, 2 Flute, Square End End Mill - 49277

SERIES: 17S

General Application End Mill

12.00mm Dia, 19.00mm LOC, 12.00mm Shank Dia, 2 Flute, 32 Degree Helix, Ti-NAMITE (TiN) Coated, Series 17S, Square End End Mill - 49277


SKU / EDP49277
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series17S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)0.7480
Length of Cut (APMX) (mm)19.00
Overall Length (LF) (Decimal Inch)2.4803
Overall Length (LF) (mm)63.00
Shank Length (LS) (Decimal Inch)1.7320
Shank Length (LS) (mm)43.99
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)32
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49277
Series_17_TA.png

12.00mm Dia, 2 Flute, Square End End Mill - 49319

SGS 12.00mm Dia, 19.00mm LOC, 12.00mm Shank Dia, 2 Flute, 32 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 17S, Square End End Mill - 49319

Series_17_TC.png

12.00mm Dia, 2 Flute, Square End End Mill - 49298

SGS 12.00mm Dia, 19.00mm LOC, 12.00mm Shank Dia, 2 Flute, 32 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 17S, Square End End Mill - 49298

Series_17_UN.jpg

12.00mm Dia, 2 Flute, Square End End Mill - 41765

SGS 12.00mm Dia, 19.00mm LOC, 12.00mm Shank Dia, 2 Flute, 32 Degree Helix, Uncoated, Series 17S, Square End End Mill - 41765

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.