Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_16_16M_Drawing.jpg
Series_16_TN.png

5.00mm Dia, 4 Flute, Square End End Mill - 49144

SERIES: 16S

General Application End Mill

5.00mm Dia, 10.00mm LOC, 5.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 16S, Square End End Mill - 49144


SKU / EDP49144
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series16S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1969
Cutting Diameter (DC) (mm)5.00
Shank Diameter (DCON) (Decimal Inch)0.1969
Shank Diameter (DCON) (mm)5.00
Length of Cut (APMX) (Decimal Inch)0.3937
Length of Cut (APMX) (mm)10.00
Overall Length (LF) (Decimal Inch)1.9685
Overall Length (LF) (mm)50.00
Shank Length (LS) (Decimal Inch)1.5760
Shank Length (LS) (mm)40.03
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 49144
Series_16_TA.png

5.00mm Dia, 4 Flute, Square End End Mill - 49186

SGS 5.00mm Dia, 10.00mm LOC, 5.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 16S, Square End End Mill - 49186

Series_16_TC.png

5.00mm Dia, 4 Flute, Square End End Mill - 49165

SGS 5.00mm Dia, 10.00mm LOC, 5.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 16S, Square End End Mill - 49165

Series_16_UN.jpg

5.00mm Dia, 4 Flute, Square End End Mill - 41637

SGS 5.00mm Dia, 10.00mm LOC, 5.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 16S, Square End End Mill - 41637

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.