Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_14B_14MB_Drawing.jpg
Series_14B_TN.png

3.50mm Dia, 4 Flute, Ball Nose End Mill - 48952

SERIES: 14B

General Application End Mill - Double-End

3.50mm Dia, 7.00mm LOC, 4.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48952


SKU / EDP48952
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series14B
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1378
Cutting Diameter (DC) (mm)3.50
Shank Diameter (DCON) (Decimal Inch)0.1575
Shank Diameter (DCON) (mm)4.00
Length of Cut (APMX) (Decimal Inch)0.2756
Length of Cut (APMX) (mm)7.00
Overall Length (LF) (Decimal Inch)1.9685
Overall Length (LF) (mm)50.00
Shank Length (LS) (Decimal Inch)1.6940
Shank Length (LS) (mm)43.03
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48952
Series_14B_TA.png

3.50mm Dia, 4 Flute, Ball Nose End Mill - 48994

SGS 3.50mm Dia, 7.00mm LOC, 4.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48994

Series_14B_TC.png

3.50mm Dia, 4 Flute, Ball Nose End Mill - 48973

SGS 3.50mm Dia, 7.00mm LOC, 4.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48973

Series_14B_UN.jpg

3.50mm Dia, 4 Flute, Ball Nose End Mill - 41426

SGS 3.50mm Dia, 7.00mm LOC, 4.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14B, Double-End, Ball Nose End Mill - 41426

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.