Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_14B_14MB_Drawing.jpg
Series_14B_TN.png

2.50mm Dia, 4 Flute, Ball Nose End Mill - 48950

SERIES: 14B

General Application End Mill - Double-End

2.50mm Dia, 5.00mm LOC, 3.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48950


SKU / EDP48950
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series14B
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.0984
Cutting Diameter (DC) (mm)2.50
Shank Diameter (DCON) (Decimal Inch)0.1181
Shank Diameter (DCON) (mm)3.00
Length of Cut (APMX) (Decimal Inch)0.1969
Length of Cut (APMX) (mm)5.00
Overall Length (LF) (Decimal Inch)1.4961
Overall Length (LF) (mm)38.00
Shank Length (LS) (Decimal Inch)1.3030
Shank Length (LS) (mm)33.10
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48950
Series_14B_TA.png

2.50mm Dia, 4 Flute, Ball Nose End Mill - 48992

SGS 2.50mm Dia, 5.00mm LOC, 3.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48992

Series_14B_TC.png

2.50mm Dia, 4 Flute, Ball Nose End Mill - 48971

SGS 2.50mm Dia, 5.00mm LOC, 3.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 14B, Double-End, Ball Nose End Mill - 48971

Series_14B_UN.jpg

2.50mm Dia, 4 Flute, Ball Nose End Mill - 41418

SGS 2.50mm Dia, 5.00mm LOC, 3.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14B, Double-End, Ball Nose End Mill - 41418

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.