Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_14_14M_Drawing.jpg
Series_14S_TC.png

10.00mm Dia, 4 Flute, Square End End Mill - 48918

SERIES: 14S

General Application End Mill - Double-End

10.00mm Dia, 14.00mm LOC, 10.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 14S, Double-End, Square End End Mill - 48918


SKU / EDP48918
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series14S
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3937
Cutting Diameter (DC) (mm)10.00
Shank Diameter (DCON) (Decimal Inch)0.3937
Shank Diameter (DCON) (mm)10.00
Length of Cut (APMX) (Decimal Inch)0.5512
Length of Cut (APMX) (mm)14.00
Overall Length (LF) (Decimal Inch)2.9528
Overall Length (LF) (mm)75.00
Shank Length (LS) (Decimal Inch)2.3990
Shank Length (LS) (mm)60.93
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48918
Series_14S_TA.png

10.00mm Dia, 4 Flute, Square End End Mill - 48939

SGS 10.00mm Dia, 14.00mm LOC, 10.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14S, Double-End, Square End End Mill - 48939

Series_14S_TN.png

10.00mm Dia, 4 Flute, Square End End Mill - 48897

SGS 10.00mm Dia, 14.00mm LOC, 10.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14S, Double-End, Square End End Mill - 48897

Series_14_UN.jpg

10.00mm Dia, 4 Flute, Square End End Mill - 41457

SGS 10.00mm Dia, 14.00mm LOC, 10.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14S, Double-End, Square End End Mill - 41457

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.