Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1B_1MB_Drawing.jpg
Series_1B_TA.png

4.50mm Dia, 4 Flute, Ball Nose End Mill - 48614

SERIES: 01B

General Application End Mill

4.50mm Dia, 16.00mm LOC, 6.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01B, Ball Nose End Mill - 48614


SKU / EDP48614
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthLong
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1772
Cutting Diameter (DC) (mm)4.50
Shank Diameter (DCON) (Decimal Inch)0.2362
Shank Diameter (DCON) (mm)6.00
Length of Cut (APMX) (Decimal Inch)0.6299
Length of Cut (APMX) (mm)16.00
Overall Length (LF) (Decimal Inch)1.9685
Overall Length (LF) (mm)50.00
Shank Length (LS) (Decimal Inch)1.3400
Shank Length (LS) (mm)34.04
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48614
Series_1B_TC.png

4.50mm Dia, 4 Flute, Ball Nose End Mill - 48593

SGS 4.50mm Dia, 16.00mm LOC, 6.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01B, Ball Nose End Mill - 48593

Series_1B_TN.png

4.50mm Dia, 4 Flute, Ball Nose End Mill - 48571

SGS 4.50mm Dia, 16.00mm LOC, 6.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01B, Ball Nose End Mill - 48571

Series_1B.jpg

4.50mm Dia, 4 Flute, Ball Nose End Mill - 40134

SGS 4.50mm Dia, 16.00mm LOC, 6.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 01B, Ball Nose End Mill - 40134

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.