Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1S_TC.png

18.00mm Dia, 4 Flute, Square End End Mill - 48540

SERIES: 01S

General Application End Mill

18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01S, Square End End Mill - 48540


SKU / EDP48540
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7087
Cutting Diameter (DC) (mm)18.00
Shank Diameter (DCON) (Decimal Inch)0.7087
Shank Diameter (DCON) (mm)18.00
Length of Cut (APMX) (Decimal Inch)1.4961
Length of Cut (APMX) (mm)38.00
Overall Length (LF) (Decimal Inch)3.9370
Overall Length (LF) (mm)100.00
Shank Length (LS) (Decimal Inch)2.4440
Shank Length (LS) (mm)62.08
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 48540
Series_1S_TA.png

18.00mm Dia, 4 Flute, Square End End Mill - 48561

SGS 18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01S, Square End End Mill - 48561

Series_1S_TN.png

18.00mm Dia, 4 Flute, Square End End Mill - 48518

SGS 18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01S, Square End End Mill - 48518

Series_1_UN.jpg

18.00mm Dia, 4 Flute, Square End End Mill - 40177

SGS 18.00mm Dia, 38.00mm LOC, 18.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 01S, Square End End Mill - 40177

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.