Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

https://www.youtube.com/watch?v=ZWBNmTkeSIg

https://www.youtube.com/watch?v=0BKU7y6XSvg

https://www.youtube.com/watch?v=OnYJYzFgKwI

25.00mm Dia, 5 Flute, Corner Radius End Mill - 48065

SERIES: Z5C

Z-Carb-HPR

25.00mm Dia, 28.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48065

Feature & Benefits

An ideal balance of helix, indexing, flute depth, rake and relief
Variable indexing for chatter supression and patented edge geometry for shearing and strength
Chatter-free geometry allows deep cutting and high speed machining
Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
Enhanced corner geometry with tight tolerance corner radii
Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP	48065
Category	Solid Round Tools > Milling > High Performance End Mills
Min Order Qty	1
Series	Z5C
Series Description	Z-Carb-HPR
High Performance	Yes
End Configuration	Corner Radius
Tool Length	Stub
Unit (inch/mm)	mm
Number of Flutes	5
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)	0.9843
Cutting Diameter (DC) (mm)	25.00
Shank Diameter (DCON) (Decimal Inch)	0.9843
Shank Diameter (DCON) (mm)	25.00
Length of Cut (APMX) (Decimal Inch)	1.1024
Length of Cut (APMX) (mm)	28.00
Overall Length (LF) (Decimal Inch)	3.9370
Overall Length (LF) (mm)	100.00

Corner Radius (RE) (Decimal Inch)	0.0394
Corner Radius (RE) (mm)	1.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)	0.3450
Non-Cutting Center Diameter (NCD) (mm)	8.76
Cutting Diameter (DC) Tolerance (Decimal Inch)	+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)	+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)	h6
Corner Radius (RE) Tolerance (Decimal Inch)	+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)	+0.000/-0.050
Shank Type	Straight
Weldon Flat	No
Coolant Option	Internal Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Rake Angle	Positive
Helix Angle	Right Spiral
Helix Angle (Degree)	37
Variable Helix	No
Center Cutting	No
Chip Breaker	No

Alternative Products SKU / EDP to 48065

25.00mm Dia, 5 Flute, Corner Radius End Mill - 48025

SGS 25.00mm Dia, 28.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48025

25.00mm Dia, 5 Flute, Corner Radius End Mill - 48049

SGS 25.00mm Dia, 28.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 48049

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47077

SGS 25.00mm Dia, 28.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47077

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47084

SGS 25.00mm Dia, 28.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47084

25.00mm Dia, 5 Flute, Corner Radius End Mill - 47091

SGS 25.00mm Dia, 28.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47091