Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5LC_RCH_TM.jpg
Z5CLR_Diagram.jpg
Z-Carb-HPR_Action_Reach.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

16.00mm Dia, 5 Flute, Corner Radius End Mill - 47738

SERIES: Z5C

Z-Carb-HPR

16.00mm Dia, 35.00mm LOC, 64.00mm Reach, 16.00mm Shank Dia, 4.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47738

Feature & Benefits

  • Positive Radial Rake
  • Variable Flute Pattern
  • Open Center Design
  • Long Reach

SKU / EDP47738
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)1.3780
Length of Cut (APMX) (mm)35.00
Reach (LU) (Decimal Inch)2.5197
Reach (LU) (mm)64.00
Overall Length (LF) (Decimal Inch)4.9213
Overall Length (LF) (mm)125.00
Neck Diameter (DN) (Decimal Inch)0.5980
Neck Diameter (DN) (mm)15.19
Corner Radius (RE) (Decimal Inch)0.1575
Corner Radius (RE) (mm)4.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.2200
Non-Cutting Center Diameter (NCD) (mm)5.59
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo

Alternative Products SKU / EDP to 47738
Z5LC_RCH_TA.jpg

16.00mm Dia, 5 Flute, Corner Radius End Mill - 47736

SGS 16.00mm Dia, 35.00mm LOC, 64.00mm Reach, 16.00mm Shank Dia, 4.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47736

Z5LC_RCH_CB_TA.jpg

16.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47737

SGS 16.00mm Dia, 35.00mm LOC, 64.00mm Reach, 16.00mm Shank Dia, 4.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47737

Z5LC_RCH_CB_TM.jpg

16.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47739

SGS 16.00mm Dia, 35.00mm LOC, 64.00mm Reach, 16.00mm Shank Dia, 4.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47739

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.