Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5LC_RCH_CB_TM.jpg
Z5CLR_Diagram.jpg
Z-Carb-HPR_Action_Reach.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

12.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47703

SERIES: Z5C

Z-Carb-HPR

12.00mm Dia, 26.00mm LOC, 48.00mm Reach, 12.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47703

Feature & Benefits

  • Positive Radial Rake
  • Variable Flute Pattern
  • Open Center Design
  • Long Reach

SKU / EDP47703
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.0236
Length of Cut (APMX) (mm)26.00
Reach (LU) (Decimal Inch)1.8898
Reach (LU) (mm)48.00
Overall Length (LF) (Decimal Inch)3.9370
Overall Length (LF) (mm)100.00
Neck Diameter (DN) (Decimal Inch)0.4490
Neck Diameter (DN) (mm)11.40
Corner Radius (RE) (Decimal Inch)0.0591
Corner Radius (RE) (mm)1.50
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1650
Non-Cutting Center Diameter (NCD) (mm)4.19
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerYes

Alternative Products SKU / EDP to 47703
Z5LC_RCH_TA.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47700

SGS 12.00mm Dia, 26.00mm LOC, 48.00mm Reach, 12.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47700

Z5LC_RCH_CB_TA.jpg

12.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47701

SGS 12.00mm Dia, 26.00mm LOC, 48.00mm Reach, 12.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47701

Z5LC_RCH_TM.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47702

SGS 12.00mm Dia, 26.00mm LOC, 48.00mm Reach, 12.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47702

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.