Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5LC_RCH_CB_TA.jpg
Z5CLR_Diagram.jpg
Z-Carb-HPR_Action_Reach.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

10.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47677

SERIES: Z5C

Z-Carb-HPR

10.00mm Dia, 22.00mm LOC, 40.00mm Reach, 10.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47677

Feature & Benefits

  • Positive Radial Rake
  • Variable Flute Pattern
  • Open Center Design
  • Long Reach

SKU / EDP47677
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3937
Cutting Diameter (DC) (mm)10.00
Shank Diameter (DCON) (Decimal Inch)0.3937
Shank Diameter (DCON) (mm)10.00
Length of Cut (APMX) (Decimal Inch)0.8661
Length of Cut (APMX) (mm)22.00
Reach (LU) (Decimal Inch)1.5748
Reach (LU) (mm)40.00
Overall Length (LF) (Decimal Inch)3.9370
Overall Length (LF) (mm)100.00
Neck Diameter (DN) (Decimal Inch)0.3740
Neck Diameter (DN) (mm)9.50
Corner Radius (RE) (Decimal Inch)0.0591
Corner Radius (RE) (mm)1.50
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1380
Non-Cutting Center Diameter (NCD) (mm)3.51
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0016
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.040
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerYes

Alternative Products SKU / EDP to 47677
Z5LC_RCH_TA.jpg

10.00mm Dia, 5 Flute, Corner Radius End Mill - 47676

SGS 10.00mm Dia, 22.00mm LOC, 40.00mm Reach, 10.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47676

Z5LC_RCH_TM.jpg

10.00mm Dia, 5 Flute, Corner Radius End Mill - 47678

SGS 10.00mm Dia, 22.00mm LOC, 40.00mm Reach, 10.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47678

Z5LC_RCH_CB_TM.jpg

10.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47679

SGS 10.00mm Dia, 22.00mm LOC, 40.00mm Reach, 10.00mm Shank Dia, 1.50mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47679

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.