Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5CR_LNG_CB_TM.jpg
Z5CECR_Diagram.jpg
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

12.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47551

SERIES: Z5C

Z-Carb-HPR

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47551

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP47551
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthLong
Unit (inch/mm)mm
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.4173
Length of Cut (APMX) (mm)36.00
Overall Length (LF) (Decimal Inch)3.2677
Overall Length (LF) (mm)83.00
Corner Radius (RE) (Decimal Inch)0.0787
Corner Radius (RE) (mm)2.00
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1650
Non-Cutting Center Diameter (NCD) (mm)4.19
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerYes

Alternative Products SKU / EDP to 47551
Z5CR_LNG_TA.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47548

SGS 12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47548

Z5CR_LNG_CB_TA.jpg

12.00mm Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 47549

SGS 12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 47549

Z5CR_LNG_TM.jpg

12.00mm Dia, 5 Flute, Corner Radius End Mill - 47550

SGS 12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 47550

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.