Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46898
SERIES: ZPMC
Z-Carb-AP
16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46898
Feature & Benefits
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design changes the cutting angle to improve harmonics
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
| SKU / EDP | 46898 |
|---|---|
| Category | Solid Round Tools > Milling > High Performance End Mills |
| Min Order Qty | 1 |
| Series | ZPMC |
| Series Description | Z-Carb-AP |
| High Performance | Yes |
| End Configuration | Corner Radius |
| Tool Length | Stub |
| Unit (inch/mm) | mm |
| Number of Flutes | 4 |
| Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
| Secondary Workpiece Material | (H) Hardened Materials |
| Cutting Diameter (DC) (Decimal Inch) | 0.6299 |
| Cutting Diameter (DC) (mm) | 16.00 |
| Shank Diameter (DCON) (Decimal Inch) | 0.6299 |
| Shank Diameter (DCON) (mm) | 16.00 |
| Length of Cut (APMX) (Decimal Inch) | 1.2598 |
| Length of Cut (APMX) (mm) | 32.00 |
| Overall Length (LF) (Decimal Inch) | 3.6220 |
| Overall Length (LF) (mm) | 92.00 |
| Corner Radius (RE) (Decimal Inch) | 0.0591 |
|---|---|
| Corner Radius (RE) (mm) | 1.50 |
| Shank Length (LS) (Decimal Inch) | 2.3600 |
| Shank Length (LS) (mm) | 59.94 |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
| Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
| Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
| Shank Type | Straight |
| Weldon Flat | No |
| Coolant Option | External Coolant |
| Coating Description | TX (Ti-NAMITE-X) |
| Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
| Rake Angle | Variable |
| Helix Angle | Variable Right Spiral |
| Helix Angle (Degree) | 35-38 |
| Variable Helix | Yes |
| Center Cutting | Yes |
| Chip Breaker | No |
Alternative Products SKU / EDP to 46898
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46465
SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46465
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46476
SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46476
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46918
SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46918
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46465
SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46465
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46476
SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46476
16.00mm Dia, 4 Flute, Corner Radius End Mill - 46918
SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46918
Product enquiry form
FUTURE CRM FORM HERE
