Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
10.00mm Dia, 4 Flute, Corner Radius End Mill - 46889
SERIES: ZPMC
Z-Carb-AP
10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46889
Feature & Benefits
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design changes the cutting angle to improve harmonics
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 46889 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | ZPMC |
Series Description | Z-Carb-AP |
High Performance | Yes |
End Configuration | Corner Radius |
Tool Length | Regular |
Unit (inch/mm) | mm |
Number of Flutes | 4 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.3937 |
Cutting Diameter (DC) (mm) | 10.00 |
Shank Diameter (DCON) (Decimal Inch) | 0.3937 |
Shank Diameter (DCON) (mm) | 10.00 |
Length of Cut (APMX) (Decimal Inch) | 0.8661 |
Length of Cut (APMX) (mm) | 22.00 |
Overall Length (LF) (Decimal Inch) | 2.8346 |
Overall Length (LF) (mm) | 72.00 |
Corner Radius (RE) (Decimal Inch) | 0.0591 |
---|---|
Corner Radius (RE) (mm) | 1.50 |
Shank Length (LS) (Decimal Inch) | 1.9640 |
Shank Length (LS) (mm) | 49.89 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0016 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.040 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Shank Type | Straight |
Weldon Flat | No |
Coolant Option | External Coolant |
Coating Description | TX (Ti-NAMITE-X) |
Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
Rake Angle | Variable |
Helix Angle | Variable Right Spiral |
Helix Angle (Degree) | 35-38 |
Variable Helix | Yes |
Center Cutting | Yes |
Chip Breaker | No |
Alternative Products SKU / EDP to 46889
10.00mm Dia, 4 Flute, Corner Radius End Mill - 46458
SGS 10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 1.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46458
10.00mm Dia, 4 Flute, Corner Radius End Mill - 46458
SGS 10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 1.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46458
Product enquiry form
FUTURE CRM FORM HERE