Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z1P_TA.jpg
Series_Z1PCR_Z1MPCR_Drawing.jpg
Series_Z1_Logo_Vector.eps
Series_Z1P_Logo.jpeg
https://www.youtube.com/watch?v=Uj183IuCnZc

6.00mm Dia, 4 Flute, Corner Radius End Mill - 46854

SERIES: ZPMC

Z-Carb-AP

6.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46854

Feature & Benefits

  • Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
  • Unequal helix design changes the cutting angle to improve harmonics
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP46854
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZPMC
Series DescriptionZ-Carb-AP
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.2362
Cutting Diameter (DC) (mm)6.00
Shank Diameter (DCON) (Decimal Inch)0.2362
Shank Diameter (DCON) (mm)6.00
Length of Cut (APMX) (Decimal Inch)0.5118
Length of Cut (APMX) (mm)13.00
Overall Length (LF) (Decimal Inch)2.2441
Overall Length (LF) (mm)57.00
Corner Radius (RE) (Decimal Inch)0.0197
Corner Radius (RE) (mm)0.50
Shank Length (LS) (Decimal Inch)1.7280
Shank Length (LS) (mm)43.89
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0012
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.030
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AngleVariable
Helix AngleVariable Right Spiral
Helix Angle (Degree)35-38
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 46854
Series_ZH1_TA.jpg

6.00mm Dia, 4 Flute, Corner Radius End Mill - 46450

SGS 6.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 0.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46450

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.