Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_ZH1CR_ZH1MCR_Drawing.jpg
Series_ZH1_Logo_Vector.eps
Series_ZH1_Logo.jpg
Series_ZH1_TA.jpg

12.00mm Dia, 4 Flute, Corner Radius End Mill - 46471

SERIES: ZH1M

Z-Carb-HTA

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46471

Feature & Benefits

  • The original Z-Carb design with an enhanced core and higher helix suited for the demands of high temperature alloys
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Optimal material removal rates through increased feed and depths of cut for difficult to machine materials
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP46471
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZH1M
Series DescriptionZ-Carb-HTA
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4724
Cutting Diameter (DC) (mm)12.00
Shank Diameter (DCON) (Decimal Inch)0.4724
Shank Diameter (DCON) (mm)12.00
Length of Cut (APMX) (Decimal Inch)1.0236
Length of Cut (APMX) (mm)26.00
Overall Length (LF) (Decimal Inch)3.2677
Overall Length (LF) (mm)83.00
Corner Radius (RE) (Decimal Inch)0.0197
Corner Radius (RE) (mm)0.50
Shank Length (LS) (Decimal Inch)2.2460
Shank Length (LS) (mm)57.05
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleVariable Right Spiral
Helix Angle (Degree)38-41
Variable HelixYes
Center CuttingYes
Chip BreakerNo
DIN Standard (Shank)DIN 6535 HB

Alternative Products SKU / EDP to 46471
Series_ZH1_TA.jpg

12.00mm Dia, 4 Flute, Corner Radius End Mill - 46460

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.50mm Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1M, Z-Carb-HTA, Corner Radius End Mill - 46460

Series_Z1P_TA.jpg

12.00mm Dia, 4 Flute, Corner Radius End Mill - 46860

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46860

Series_Z1P_TA.jpg

12.00mm Dia, 4 Flute, Corner Radius End Mill - 46909

SGS 12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill - 46909

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.