Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_54_54M_Drawing.jpg
Series_54_UN.png

16.00mm Dia, 4 Flute, Square End End Mill - 45497

SERIES: 54S

General Application End Mill - High Shear

16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 54S, High Shear, Square End End Mill - 45497

SKU / EDP45497
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series54S
Series DescriptionGeneral Application End Mill - High Shear
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes4
Primary Workpiece Material(N) Non-Ferrous Materials
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)1.2598
Length of Cut (APMX) (mm)32.00
Overall Length (LF) (Decimal Inch)3.6220
Overall Length (LF) (mm)92.00
Shank Length (LS) (Decimal Inch)2.3600
Shank Length (LS) (mm)59.94
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo
Alternative Products SKU / EDP to 45497
Series_54_TC.png

16.00mm Dia, 4 Flute, Square End End Mill - 45498

SGS 16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 54S, High Shear, Square End End Mill - 45498

Product enquiry form

FUTURE CRM FORM HERE