Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_52_52M_Drawing.jpg
Series52_UN.png

3.50mm Dia, 2 Flute, Square End End Mill - 45279

SERIES: 52S

General Application End Mill - High Shear

3.50mm Dia, 7.00mm LOC, 6.00mm Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series 52S, High Shear, Square End End Mill - 45279


SKU / EDP45279
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series52S
Series DescriptionGeneral Application End Mill - High Shear
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Cutting Diameter (DC) (Decimal Inch)0.1378
Cutting Diameter (DC) (mm)3.50
Shank Diameter (DCON) (Decimal Inch)0.2362
Shank Diameter (DCON) (mm)6.00
Length of Cut (APMX) (Decimal Inch)0.2756
Length of Cut (APMX) (mm)7.00
Overall Length (LF) (Decimal Inch)2.2441
Overall Length (LF) (mm)57.00
Shank Length (LS) (Decimal Inch)1.9640
Shank Length (LS) (mm)49.89
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 45279
Series_52_TC.png

3.50mm Dia, 2 Flute, Square End End Mill - 49830

SGS 3.50mm Dia, 7.00mm LOC, 6.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 52S, High Shear, Square End End Mill - 49830

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.