Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_43LC_43MLC_43EC_Drawing.jpg
Series_43L_TB.jpg
Series_43_Logo_Vector.eps
Series_43_47_Logo.jpg

16.00mm Dia, 3 Flute, Corner Radius End Mill - 44836

SERIES: 43ML

S-Carb

16.00mm Dia, 20.00mm LOC, 50.01mm Reach, 16.00mm Shank Dia, 3.00mm Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43ML, S-Carb, Corner Radius End Mill - 44836

Feature & Benefits

  • Circular land allows for increased control at various speed and feed rates and reduces chatter
  • Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
  • Open fluting for deep slotting and profiling
  • Necked design with blended diameter transitions provide clearance to reach
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP44836
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series43ML
Series DescriptionS-Carb
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong Reach Neck
Unit (inch/mm)mm
Number of Flutes3
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.6299
Cutting Diameter (DC) (mm)16.00
Shank Diameter (DCON) (Decimal Inch)0.6299
Shank Diameter (DCON) (mm)16.00
Length of Cut (APMX) (Decimal Inch)0.7874
Length of Cut (APMX) (mm)20.00
Reach (LU) (Decimal Inch)1.9690
Reach (LU) (mm)50.01
Overall Length (LF) (Decimal Inch)4.9213
Overall Length (LF) (mm)125.00
Neck Diameter (DN) (Decimal Inch)0.6091
Neck Diameter (DN) (mm)15.47
Corner Radius (RE) (Decimal Inch)0.1181
Corner Radius (RE) (mm)3.00
Shank Length (LS) (Decimal Inch)4.1338
Shank Length (LS) (mm)105.00
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00043
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.011
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)38
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 44836
Series_43L_TB.jpg

16.00mm Dia, 3 Flute, Corner Radius End Mill - 44739

SGS 16.00mm Dia, 20.00mm LOC, 50.01mm Reach, 16.00mm Shank Dia, 3.00mm Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43ML, S-Carb, Corner Radius End Mill - 44739

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.