Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_44_45_Logo.jpg
Series_44_44M_Drawing.jpg
Series_44_TB.jpg
Series_44_45_Logo_Vector.eps

18.00mm Dia, 2 Flute, Square End End Mill - 44542

SERIES: 44S

Ski-Carb

18.00mm Dia, 32.00mm LOC, 18.00mm Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 44542

Feature & Benefits

  • Polished ski land with primary and secondary flute wall design minimizes chip interference by directing chips away from secondary flute
  • Circular land allows for increased control at various speed and feed rates ultimately reducing chatter
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP44542
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series44S
Series DescriptionSki-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.7087
Cutting Diameter (DC) (mm)18.00
Shank Diameter (DCON) (Decimal Inch)0.7087
Shank Diameter (DCON) (mm)18.00
Length of Cut (APMX) (Decimal Inch)1.2598
Length of Cut (APMX) (mm)32.00
Overall Length (LF) (Decimal Inch)3.6220
Overall Length (LF) (mm)92.00
Shank Length (LS) (Decimal Inch)2.3620
Shank Length (LS) (mm)59.99
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00043
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.011
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo
DIN Standard (Shank)DIN 6535 HB

Alternative Products SKU / EDP to 44542
Series_44_TB.jpg

18.00mm Dia, 2 Flute, Square End End Mill - 49683

SGS 18.00mm Dia, 32.00mm LOC, 18.00mm Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 49683

Series_44_TB.jpg

18.00mm Dia, 2 Flute, Square End End Mill - 49672

SGS 18.00mm Dia, 32.00mm LOC, 18.00mm Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 49672

Series_44_TB.jpg

18.00mm Dia, 2 Flute, Square End End Mill - 44541

SGS 18.00mm Dia, 32.00mm LOC, 18.00mm Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 44541

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.