Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3B_3MB_Drawing.jpg
Series_3B.jpg

2.50mm Dia, 2 Flute, Ball Nose End Mill - 40318

SERIES: 03B

General Application End Mill

2.50mm Dia, 9.50mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series 03B, Ball Nose End Mill - 40318


SKU / EDP40318
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series03B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthLong
Unit (inch/mm)mm
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.0984
Cutting Diameter (DC) (mm)2.50
Shank Diameter (DCON) (Decimal Inch)0.1181
Shank Diameter (DCON) (mm)3.00
Length of Cut (APMX) (Decimal Inch)0.3740
Length of Cut (APMX) (mm)9.50
Overall Length (LF) (Decimal Inch)1.4961
Overall Length (LF) (mm)38.00
Shank Length (LS) (Decimal Inch)1.1260
Shank Length (LS) (mm)28.60
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 40318
Series_3B_TA.png

2.50mm Dia, 2 Flute, Ball Nose End Mill - 48738

SGS 2.50mm Dia, 9.50mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 03B, Ball Nose End Mill - 48738

Series_3B_TC.png

2.50mm Dia, 2 Flute, Ball Nose End Mill - 48717

SGS 2.50mm Dia, 9.50mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 03B, Ball Nose End Mill - 48717

Series_3B_TN.png

2.50mm Dia, 2 Flute, Ball Nose End Mill - 48695

SGS 2.50mm Dia, 9.50mm LOC, 3.00mm Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 03B, Ball Nose End Mill - 48695

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.