Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_15_15M_Drawing.jpg
Series_15S_TC.png

7/32" Dia, 2 Flute, Square End End Mill - 39675

SERIES: 15S

General Application End Mill - Double-End

7/32" Dia, 1/2" LOC, 1/4" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15S, Double-End, Square End End Mill - 39675


SKU / EDP39675
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series15S
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.2188
Cutting Diameter (DC) (Fractional Inch)7/32
Cutting Diameter (DC) (mm)5.56
Shank Diameter (DCON) (Decimal Inch)0.2500
Shank Diameter (DCON) (Fractional Inch)1/4
Shank Diameter (DCON) (mm)6.35
Length of Cut (APMX) (Decimal Inch)0.5000
Length of Cut (APMX) (Fractional Inch)1/2
Length of Cut (APMX) (mm)12.70
Overall Length (LF) (Decimal Inch)2.5000
Overall Length (LF) (Fractional Inch)2-1/2
Overall Length (LF) (mm)63.50
Shank Length (LS) (Decimal Inch)2.0000
Shank Length (LS) (Fractional Inch)2
Shank Length (LS) (mm)50.80
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)33
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 39675
Series_15S_TA.png

7/32" Dia, 2 Flute, Square End End Mill - 31328

SGS 7/32" Dia, 1/2" LOC, 1/4" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 15S, Double-End, Square End End Mill - 31328

Series_15S_TN.png

7/32" Dia, 2 Flute, Square End End Mill - 31565

SGS 7/32" Dia, 1/2" LOC, 1/4" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE (TiN) Coated, Series 15S, Double-End, Square End End Mill - 31565

Series_15_UN.jpg

7/32" Dia, 2 Flute, Square End End Mill - 31525

SGS 7/32" Dia, 1/2" LOC, 1/4" Shank Dia, 2 Flute, 33 Degree Helix, Uncoated, Series 15S, Double-End, Square End End Mill - 31525

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.