Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1S_TN.png

27/64" Dia, 4 Flute, Square End End Mill - 39153

SERIES: 01S

General Application End Mill

27/64" Dia, 1" LOC, 7/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01S, Square End End Mill - 39153


SKU / EDP39153
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4219
Cutting Diameter (DC) (Fractional Inch)27/64
Cutting Diameter (DC) (mm)10.72
Shank Diameter (DCON) (Decimal Inch)0.4375
Shank Diameter (DCON) (Fractional Inch)7/16
Shank Diameter (DCON) (mm)11.11
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)2.7500
Overall Length (LF) (Fractional Inch)2-3/4
Overall Length (LF) (mm)69.85
Shank Length (LS) (Decimal Inch)1.7500
Shank Length (LS) (Fractional Inch)1-3/4
Shank Length (LS) (mm)44.45
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 39153
Series_1S_TA.png

27/64" Dia, 4 Flute, Square End End Mill - 30017

SGS 27/64" Dia, 1" LOC, 7/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01S, Square End End Mill - 30017

Series_1S_TC.png

27/64" Dia, 4 Flute, Square End End Mill - 39053

SGS 27/64" Dia, 1" LOC, 7/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01S, Square End End Mill - 39053

Series_1_UN.jpg

27/64" Dia, 4 Flute, Square End End Mill - 30153

SGS 27/64" Dia, 1" LOC, 7/16" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 01S, Square End End Mill - 30153

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.