Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1S_TC.png

11/16" Dia, 4 Flute, Square End End Mill - 39069

SERIES: 01S

General Application End Mill

11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 01S, Square End End Mill - 39069


SKU / EDP39069
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series01S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6875
Cutting Diameter (DC) (Fractional Inch)11/16
Cutting Diameter (DC) (mm)17.46
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)1.3750
Length of Cut (APMX) (Fractional Inch)1-3/8
Length of Cut (APMX) (mm)34.93
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.6250
Shank Length (LS) (Fractional Inch)2-5/8
Shank Length (LS) (mm)66.68
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 39069
Series_1S_TA.png

11/16" Dia, 4 Flute, Square End End Mill - 30025

SGS 11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 01S, Square End End Mill - 30025

Series_1S_TN.png

11/16" Dia, 4 Flute, Square End End Mill - 39169

SGS 11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 01S, Square End End Mill - 39169

Series_1_UN.jpg

11/16" Dia, 4 Flute, Square End End Mill - 30169

SGS 11/16" Dia, 1-3/8" LOC, 3/4" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 01S, Square End End Mill - 30169

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.