Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Drawing.jpg
Series_Z5_Logo.jpg
Series_Z5S_TA.jpg
Series_Z5TA_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

3/4" Dia, 5 Flute, Square End End Mill - 38515

SERIES: Z5S

Z-Carb-HPR

3/4" Dia, 7/8" LOC, 3/4" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 38515

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP38515
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5S
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)0.8750
Length of Cut (APMX) (Fractional Inch)7/8
Length of Cut (APMX) (mm)22.23
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)3.1250
Shank Length (LS) (Fractional Inch)3-1/8
Shank Length (LS) (mm)79.38
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.2630
Non-Cutting Center Diameter (NCD) (mm)6.68
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 38515
Series_Z5S_TA.jpg

3/4" Dia, 5 Flute, Square End End Mill - 38509

SGS 3/4" Dia, 7/8" LOC, 3/4" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 38509

Series_Z5S_TA.jpg

3/4" Dia, 5 Flute, Square End End Mill - 38520

SGS 3/4" Dia, 7/8" LOC, 3/4" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 38520

Series_Z5S_TM.jpg

3/4" Dia, 5 Flute, Square End End Mill - 37088

SGS 3/4" Dia, 7/8" LOC, 3/4" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37088

Series_Z5S_TM.jpg

3/4" Dia, 5 Flute, Square End End Mill - 37095

SGS 3/4" Dia, 7/8" LOC, 3/4" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37095

Series_Z5S_TM.jpg

3/4" Dia, 5 Flute, Square End End Mill - 37274

SGS 3/4" Dia, 7/8" LOC, 3/4" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37274

Product enquiry form

FUTURE CRM FORM HERE