Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3CR_Drawing.jpg
Series_3CR_TA.png

5/8" Dia, 2 Flute, Corner Radius End Mill - 38383

SERIES: 03C

General Application End Mill

5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 0.0600" Radius, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 03C, Corner Radius End Mill - 38383

Feature & Benefits

  • Weldon Flat

SKU / EDP38383
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series03C
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6250
Cutting Diameter (DC) (Fractional Inch)5/8
Cutting Diameter (DC) (mm)15.88
Shank Diameter (DCON) (Decimal Inch)0.6250
Shank Diameter (DCON) (Fractional Inch)5/8
Shank Diameter (DCON) (mm)15.88
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Corner Radius (RE) (Decimal Inch)0.0600
Corner Radius (RE) (mm)1.52
Shank Length (LS) (Decimal Inch)1.7000
Shank Length (LS) (mm)43.18
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 38383
Series_3CR_TC.png

5/8" Dia, 2 Flute, Corner Radius End Mill - 38341

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 0.0600" Radius, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 03C, Corner Radius End Mill - 38341

Series_3CR_TN.png

5/8" Dia, 2 Flute, Corner Radius End Mill - 38282

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 0.0600" Radius, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 03C, Corner Radius End Mill - 38282

Series_3CR_UN.jpg

5/8" Dia, 2 Flute, Corner Radius End Mill - 38281

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 0.0600" Radius, 2 Flute, 30 Degree Helix, Uncoated, Series 03C, Corner Radius End Mill - 38281

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.