Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5LC_RCH_CB_TA.jpg
Z5CLR_Diagram.jpg
Z-Carb-HPR_Action_Reach.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1/8" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37763

SERIES: Z5C

Z-Carb-HPR

1/8" Dia, 1/4" LOC, 1/2" Reach, 1/8" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37763

Feature & Benefits

  • Positive Radial Rake
  • Variable Flute Pattern
  • Open Center Design
  • Long Reach

SKU / EDP37763
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthLong Reach Neck
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1250
Cutting Diameter (DC) (Fractional Inch)1/8
Cutting Diameter (DC) (mm)3.18
Shank Diameter (DCON) (Decimal Inch)0.1250
Shank Diameter (DCON) (Fractional Inch)1/8
Shank Diameter (DCON) (mm)3.18
Length of Cut (APMX) (Decimal Inch)0.2500
Length of Cut (APMX) (Fractional Inch)1/4
Length of Cut (APMX) (mm)6.35
Reach (LU) (Decimal Inch)0.5000
Reach (LU) (Fractional Inch)1/2
Reach (LU) (mm)12.70
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Neck Diameter (DN) (Decimal Inch)0.1190
Neck Diameter (DN) (mm)3.02
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.0290
Non-Cutting Center Diameter (NCD) (mm)0.74
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0012
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.030
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerYes

Alternative Products SKU / EDP to 37763
Z5LC_RCH_TA.jpg

1/8" Dia, 5 Flute, Corner Radius End Mill - 37762

SGS 1/8" Dia, 1/4" LOC, 1/2" Reach, 1/8" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37762

Z5LC_RCH_TM.jpg

1/8" Dia, 5 Flute, Corner Radius End Mill - 37764

SGS 1/8" Dia, 1/4" LOC, 1/2" Reach, 1/8" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37764

Z5LC_RCH_CB_TM.jpg

1/8" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37765

SGS 1/8" Dia, 1/4" LOC, 1/2" Reach, 1/8" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37765

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.