Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5CR_LNG_IC_TM.jpg
Z5CECR_Diagram.jpg
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1" Dia, 5 Flute, Corner Radius End Mill - 37711

SERIES: Z5C

Z-Carb-HPR

1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37711

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP37711
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)3.0000
Length of Cut (APMX) (Fractional Inch)3
Length of Cut (APMX) (mm)76.20
Overall Length (LF) (Decimal Inch)6.0000
Overall Length (LF) (Fractional Inch)6
Overall Length (LF) (mm)152.40
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.3500
Non-Cutting Center Diameter (NCD) (mm)8.89
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionInternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryChip Breaker / Right Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo

Alternative Products SKU / EDP to 37711
Z5CR_LNG_TA.jpg

1" Dia, 5 Flute, Corner Radius End Mill - 37706

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37706

Z5CR_LNG_IC_TA.jpg

1" Dia, 5 Flute, Corner Radius End Mill - 37707

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37707

Z5CR_LNG_CB_TA.jpg

1" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37708

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37708

Z5CR_LNG_CB_IC_TA.jpg

1" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37709

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37709

Z5CR_LNG_TM.jpg

1" Dia, 5 Flute, Corner Radius End Mill - 37710

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37710

Z5CR_LNG_CB_TM.jpg

1" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37712

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37712

Z5CR_LNG_CB_IC_TM.jpg

1" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37713

SGS 1" Dia, 3" LOC, 1" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37713

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.