Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Logo.jpg
Z5CR_LNG_CB_TM.jpg
Z5CECR_Diagram.jpg
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1/2" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37536

SERIES: Z5C

Z-Carb-HPR

1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37536

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP37536
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5C
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.5000
Cutting Diameter (DC) (Fractional Inch)1/2
Cutting Diameter (DC) (mm)12.70
Shank Diameter (DCON) (Decimal Inch)0.5000
Shank Diameter (DCON) (Fractional Inch)1/2
Shank Diameter (DCON) (mm)12.70
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.1750
Non-Cutting Center Diameter (NCD) (mm)4.45
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTM (Ti-NAMITE-M)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerYes

Alternative Products SKU / EDP to 37536
Z5CR_LNG_TA.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 37530

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37530

Z5CR_LNG_IC_TA.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 37531

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37531

Z5CR_LNG_CB_TA.jpg

1/2" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37532

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37532

Z5CR_LNG_CB_IC_TA.jpg

1/2" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37533

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37533

Z5CR_LNG_TM.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 37534

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37534

Z5CR_LNG_IC_TM.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 37535

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Corner Radius End Mill - 37535

Z5CR_LNG_CB_IC_TM.jpg

1/2" Dia, 5 Flute, Chip Breaker Corner Radius End Mill - 37537

SGS 1/2" Dia, 1-1/2" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5C, Z-Carb-HPR, Chip Breaker Corner Radius End Mill - 37537

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.