Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Drawing.jpg
Series_Z5_Logo.jpg
Series_Z5S_TA.jpg
Series_Z5TA_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

5/8" Dia, 5 Flute, Square End End Mill - 37202

SERIES: Z5S

Z-Carb-HPR

5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37202

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials

SKU / EDP37202
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5S
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.6250
Cutting Diameter (DC) (Fractional Inch)5/8
Cutting Diameter (DC) (mm)15.88
Shank Diameter (DCON) (Decimal Inch)0.6250
Shank Diameter (DCON) (Fractional Inch)5/8
Shank Diameter (DCON) (mm)15.88
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Overall Length (LF) (Decimal Inch)3.5000
Overall Length (LF) (Fractional Inch)3-1/2
Overall Length (LF) (mm)88.90
Shank Length (LS) (Decimal Inch)2.2500
Shank Length (LS) (Fractional Inch)2-1/4
Shank Length (LS) (mm)57.15
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.2190
Non-Cutting Center Diameter (NCD) (mm)5.56
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo

Alternative Products SKU / EDP to 37202
Series_Z5S_TA.jpg

5/8" Dia, 5 Flute, Square End End Mill - 37198

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37198

Series_Z5S_TA.jpg

5/8" Dia, 5 Flute, Square End End Mill - 38519

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 38519

Series_Z5S_TM.jpg

5/8" Dia, 5 Flute, Square End End Mill - 37074

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37074

Series_Z5S_TM.jpg

5/8" Dia, 5 Flute, Square End End Mill - 37081

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37081

Series_Z5S_TM.jpg

5/8" Dia, 5 Flute, Square End End Mill - 37267

SGS 5/8" Dia, 1-1/4" LOC, 5/8" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37267

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.