Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z1S_TA.jpg
Series_Z1_Z1M_Drawing.jpg
Z-Carb.eps
Series_Z1_Logo.jpg

3/4" Dia, 4 Flute, Square End End Mill - 36537

SERIES: Z1S

Z-Carb

3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series Z1S, Z-Carb, Square End End Mill - 36537

Feature & Benefits

  • Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
  • Unequal helix design changes the cutting angle to improve harmonics
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP36537
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ1S
Series DescriptionZ-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (Fractional Inch)2-1/2
Shank Length (LS) (mm)63.50
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AngleVariable
Helix AngleVariable Right Spiral
Helix Angle (Degree)35-38
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 36537
Series_Z1S_TA.jpg

3/4" Dia, 4 Flute, Square End End Mill - 36442

SGS 3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series Z1S, Z-Carb, Square End End Mill - 36442

Series_Z1S_TA.jpg

3/4" Dia, 4 Flute, Square End End Mill - 36829

SGS 3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series Z1S, Z-Carb, Square End End Mill - 36829

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.