Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1L_UN.jpg

5/16" Dia, 4 Flute, Square End End Mill - 33105

SERIES: L1S

General Application End Mill

5/16" Dia, 1-1/8" LOC, 5/16" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series L1S, Square End End Mill - 33105


SKU / EDP33105
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesL1S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3125
Cutting Diameter (DC) (Fractional Inch)5/16
Cutting Diameter (DC) (mm)7.94
Shank Diameter (DCON) (Decimal Inch)0.3125
Shank Diameter (DCON) (Fractional Inch)5/16
Shank Diameter (DCON) (mm)7.94
Length of Cut (APMX) (Decimal Inch)1.1250
Length of Cut (APMX) (Fractional Inch)1-1/8
Length of Cut (APMX) (mm)28.58
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Shank Length (LS) (Decimal Inch)1.8750
Shank Length (LS) (Fractional Inch)1-7/8
Shank Length (LS) (mm)47.63
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 33105
Series_1L_TA.png

5/16" Dia, 4 Flute, Square End End Mill - 31763

SGS 5/16" Dia, 1-1/8" LOC, 5/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series L1S, Square End End Mill - 31763

Series_1L_TC.png

5/16" Dia, 4 Flute, Square End End Mill - 31740

SGS 5/16" Dia, 1-1/8" LOC, 5/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series L1S, Square End End Mill - 31740

Series_1L_TN.png

5/16" Dia, 4 Flute, Square End End Mill - 31730

SGS 5/16" Dia, 1-1/8" LOC, 5/16" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series L1S, Square End End Mill - 31730

Series_1L_UN.jpg

5/16" Dia, 4 Flute, Square End End Mill - 93327

SGS 5/16" Dia, 1-1/8" LOC, 5/16" Shank Dia, 4 Flute, 30 Degree Helix, Amorphous Diamond Coated, Series L1S, Square End End Mill - 93327

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.