Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_55_Logo.png
Series_55_55M_Drawing.jpg
Series_55_Logo_Vector.eps
Series_55_SQ_SM_TA.jpg
https://www.youtube.com/watch?v=-nBE4nJr3aM

3/16" Dia, 5 Flute, Square End End Mill - 32673

SERIES: 55S

V-Carb

3/16" Dia, 5/16" LOC, 3/16" Shank Dia, 5 Flute, 45 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 55S, V-Carb, Square End End Mill - 32673

Feature & Benefits

  • Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
  • The choice when peak finish quality is the requirement
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP32673
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
Series55S
Series DescriptionV-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1875
Cutting Diameter (DC) (Fractional Inch)3/16
Cutting Diameter (DC) (mm)4.76
Shank Diameter (DCON) (Decimal Inch)0.1875
Shank Diameter (DCON) (Fractional Inch)3/16
Shank Diameter (DCON) (mm)4.76
Length of Cut (APMX) (Decimal Inch)0.3125
Length of Cut (APMX) (Fractional Inch)5/16
Length of Cut (APMX) (mm)7.94
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Shank Length (LS) (Decimal Inch)1.6875
Shank Length (LS) (Fractional Inch)1-11/16
Shank Length (LS) (mm)42.86
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 32673
Series_Z5S_TM.jpg

3/16" Dia, 5 Flute, Square End End Mill - 37004

SGS 3/16" Dia, 5/16" LOC, 3/16" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37004

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.